Page 523 - Workshop Manual - Tunland (2017)

DIAGNOSTICS - LIGHTING SYSTEM 04-385

(b) Unplug the relay R2 of passing lamps.

(c) Disconnect the connector A011 of left front
passing lamp.
(d) Disconnect the connector A003 of right front
passing lamp.
04

(e) Measure the electrical resistance based on
the value in the following form.

Standard electrical resistance (check
whether there existent an open circuit)

Multimeter connection Standard value
R2
R2（5）-A011（1）
＜ 2 Ω
R2（5）-A003（1）

ftwxd041393

Check whether the result is normal?

Yes> go to step 6
No > Maintenance or replace harness.

6 . Check the harness and connectors (passing lamp - ground)
(a) Ignition Switch: OFF.
(b) Unplug the relay R2 of passing lamps.

(c) Disconnect the connector A011 of left front
passing lamp.
(d) Disconnect the connector A003 of right front
passing lamp.