Page 531 - Workshop Manual - Tunland (2017)
P. 531

DIAGNOSTICS - LIGHTING SYSTEM                            04-393

                                                           (e)    Measure the electrical resistance based on
                                                                  the value in the following form.
                                                                  Standard electrical resistance (check
                                                                  whether there existent an open circuit)

                                                            Multimeter connection          Standard value
                                                                                                                     04
                     C036                                     R7（5）-A016（1）
                                                                                                ＜ 2 Ω
                                                              R7（5）-A005（1）




                                       C040









                                                 ftwxd041391

                 Check whether the result is normal?

                 Yes> go to step 5
                 No > Maintain or replace the harness


                 5 .    Check the harness and connectors (front fog lamp - ground)
                 (a)    Ignition Switch: OFF.
                 (b)    Unplug the front fog lamp relay R7.

                                                           (c)    Disconnect the left front fog lamp connector
                                                                  A016.
                                                           (d)    Disconnect the right front fog lamp connector
                                                                  A005.
   526   527   528   529   530   531   532   533   534   535   536