Page 530 - Workshop Manual - Tunland (2017)

04-392 DIAGNOSTICS - LIGHTING SYSTEM

(b) Unplug the front fog lamp relay R7.

(c) Check the front fog lamp relay R7.

Standard voltage

Connecting
04 Specified
Conditions pins of
value
multimeter
Normal
1–2 Breakover
situation
Apply power
supply voltage
to position
3–5 ＜ 2 Ω
between
stitches 1 and
2,

Check whether the result is normal?
Yes> go to step 4
No > Replace the front fog lamp relay.

4 . Check the harness and connectors (front fog lamp relay – front fog lamp)
(a) Ignition Switch: OFF.
(b) Unplug the front fog lamp relay R7.

(c) Disconnect the left front fog lamp connector
A016.
(d) Disconnect the right front fog lamp connector
A005.