Page 25 - 25270_1
P. 25

Cleaning, Disinfection and sterilization  2  Technical Characteristics



         8        TECHNICAL CHARACTERISTICS
 N°  Operation  Operating mode  Warning
 Check the validity period of the   ProPex  II complies to IEC60601-1 safety standard and the
                          ®
 pouch given by the manufacturer
 to determine the shelf life.  requirement of CE Marking of Conformity.
 7.  Packaging  Pack the devices in “Sterilization
 pouches”.  Use packaging which are
 resistant up to a temperature of
 141°C (286°F) and in   0086
 accordance with EN ISO 11607.
                          ®
 The accessories (lip clip, hook   ProPex  II electronic apex locator belongs to the following category of
 and fork) must be sterilized
 according to the packaging   medical devices:
 labelling.
 Use fractionated vacuum or   Specification                  Description
 gravity (less preferred)
 autoclaves (according to                           Maillefer Instruments Holding Sàrl
 EN 13060, EN 285).
 8.  Sterilization  Steam sterilization at: 134°C   Chemin du Verger 3
 (237°F) during 3 min.  Use validated sterilization   Manufacturer  CH-1338 Ballaigues
 procedure according to                             Switzerland
 ISO 17665-1.
                                                    endo@dentsplysirona.com
 Respect maintenance procedure
                                                           ®
 of the autoclave device given by   Model           ProPex  II apex locator
 the manufacturer.
           Dimensions (Length x Height x Width)     130 x 80 x 63 mm
 Use only the listed sterilization
 procedures.  Weight                                360 g
 Sterility cannot be guaranteed if   Type of screen  Color Graphic TFT
 Keep devices in sterilization
 9.  Storage  packaging in a dry and clean   packaging is open, damaged or   Screen dimensions  3.5“
 environment.  wet (check the packaging before
 using the instruments).
           Power supply                             Rechargeable battery:
                                                    2.4 V NiMH
           Charger power supply (input)             120 V or 230 V
           Charger power supply (output)            6 VDC
           Frequency                                50 - 60 Hz
           Type of protection against electrical shock  Internally powered equipment
           Applied part                             BF















 26/172  B EU PIIL DFU PRT / Rev.07 / 02-2018 (Old ZF 190292.X)  B EU PIIL DFU PRT / Rev.07 / 02-2018 (Old ZF 190292.X)  27/172














































































 1





                                                                                        # 25270-EYAL - 25270_pnim_eyal.1.1 | 1 - A | 18-05-15 | 13:28:55 | SR:-- | Magenta  25270-EYAL - 25270_pnim_eyal.1.1 | 1 - A | 18-05-15 | 13:28:55 | SR:-- | Yellow  #25270-EYAL - 25270_pnim_eyal.1.1 | 1 - A | 18-05-15 | 13:28:55 | SR:-- | Black
   20   21   22   23   24   25   26   27   28   29   30