Page 108 - Best Practices In Knowledge Transfer Programme(KTP) Phase 1

APPENDIX 2: BLADE AND TANK DESIGN
KNOWLEDGE TRANSFER BY UNIVERSITY

APPENDIX 2 : TECHNICAL DRAWING FOR GEAR ASSEMBLY
KNOWLEDGE TRANSFER BY UNIVERSITY

97

APPENDIX 2: PRINTING MECHANISM
KNOWLEDGE TRANSFER BY UNIVERSITY

DUAL BLADE INSTALLATION

1. Positioning and orientation • The contact angle should be 30° tangent to the anilox roller.
• To obtain optimum blade performance.

2. Angle • Depends on rotation, the twin blade positioned straight on the top of the ink chamber.
• Bevel tip was point away from the roll or towards the chamber to prevent streaking.
• positions of dual blades are adjustable.

3. Pressure • light pressure between the anilox roller and blades is require to produce a clean wip-
ing action.
• The recommended pressure is 25 to 30 lbs. or 1.7 to 2 bars

Best Practices in KTP
ASSOC. PROF. DR. MOHD SHAHRIR BIN MOHD SANI