Page 42 - Scaffolding Hand Book - L&T CSTI Serampore

Size (m) Overall length (m) Weight (kg)
0.8 0.752 3.9
1.3 1.252 6.6
1.8 1.752 10.0
2.5 2.452 24.8

Ladder Access Transom

A square-section transom with an Omega profile across part of its width to support short battens
Description Size(mm) Weight (kg)
behind a ladder opening. It has a claw at one end and a half coupler at the other to ensure se-
Swivel Base Plate
4.6
150x150
cure positioning along the ledgers. Must only be used in conjunction with Omega transoms.

Standards available in sizes

Return Transom

A transom with a steel hook profile which locates over the ledger of the adjacent return scaffold,

linking the two sections together. The other side of the transom incorporates a conventional
Weight (kg)
Description
Size(mm)
Omega section to receive timber or steel battens. 7.30
186x200x80x60
U Head jack
Standards available in sizes
Omega Single Board Support

Locates at the cup joint and provides support for a single inside batten.

Standards available in sizes

Omega Hop-up Bracket
Size (mm) Weight (kg)
Designed to increase the overall width of the working platform to seven or eight Battens by sup-
150 x 120 x 171 1
porting two or three additional battens beyond the inner face of the scaffold. It incorporates a cup
joint at the far end to allow the fitting of an inside ledger which links the hop-up brackets to pre-

vent movement. It also incorporates an opening to support a handrail post.

Standards available in sizes

Omega Two and Three Board Corner Units

Provides an external corner support 2 or 3 battens wide. For use between hop-up brackets. Infill
Weight (kg)
with timber, cut to fit. 1

Standards available in sizes

Description Weight (kg)
Weight (kg)
2 board 1 6.6
3 board
Participant Handbook : Scaffolding 9.3 42