Page 487 - Wago_AutomationTechnology_Volume3_2015_US.pdf

6

485

System bus 1: RD+/TD+
Input Output 2: RD--/TD-- Block diagram of an input
3: TD--/RD--
4 4
1 5 3 3 5 1 4: TD+/RD+ Analog Input Supply
2 2 5: GND
Housing: Shield X1 ... X4
M12 B coded
M12 M12
1 1
Analog Inputs 1: 24 V U 2 A/D Logic
X1 ... X4 2: Input + LS
4
1 2 2 3 + +
5 5
4 3 1 4 5: Shield _ _
3 3
M12 A coded 10 nF 270 pF Ch Er
4: Input - 1 ... 4 1 ... 4
3: 0 V U Shield 5
LS
Housing: Shield
Supply 1: 24 V U Module
Input Output 2: 24 V U LS mount
3: 0 V U A
2 2 LS
3 1 1 3 4: 0 V U A
4 4
M12 A coded

Technical Data Technical Data
Analog value creation: Isolation: 6
Resolution 16 bits Channel – Channel No
Conversion method SAR U LS , U A , system bus 500 V DC each
Monotonicity without error code yes Configurable functions:
Conversion time 1 ms Measuring range (per channel) 0-20 mA, 4-20 mA, ±20 mA, 0-10 V,
Sampling delay 1 ms (module) ±10 V, user-defined
< 100 μs (channel/channel) Limiting values (per channel) Min./Max.
Sampling repeat time 1ms Input filter (per channel) 50 Hz / 60 Hz / filter off
Failures and errors: Substitute value (per channel) Value
Voltage proof up to 32 V (internal current limitation) Online simulation (per channel) Lock/unlock; simulation value: (according
Max. measuring error at 25°C ≤ ± 0.2 % of the measuring range to measuring range)
Temperature error ≤ 100 ppm/K of measuring range Online simulation (per channel/
Maximum error over the full module) Diagnostics
temperature range ≤ ± 0.6 % of the measuring range I/O diagnostics:
System bus: I/O diagnostics (per channel) Overrange/measuring range underflow
Connection type (3) M12 connectors, B coded, 5 poles, and wire break at 4-20 mA
shielded Overcurrent
Standards and approvals: Limit value violation (min/max)
Conformity marking 1 I/O diagnostics (per module) Short circuit/overload (sensor supply)
Korea Certification undervoltage (U LS + U A )
r UL 508 Process image:
Process data width 8-byte data + status
LED indicators:
SB: System bus status LED (green/red/orange)
F: Error status LED (red)
Ch1 ... Ch4: Input signal status LED (yellow)
Er1 ... Er4: Input signal error LED (red)
U LS + U A : Supply status LED (green)
Indicators Non-latching

General Specifications
Dimensions (mm) W x H x L 50 x 35.7 x 117
Weight 262 g