Page 482 - Wago_AutomationTechnology_Volume3_2015_US.pdf

767-5803

6 Digital Input/Output Module 24 V DC / 0.5 A

480 8 inputs/outputs (8 x M12)

8DIO
Module marking
System bus
output (3)
System bus
input (3)
7
LED indicators
X
6 8
X
7
5
4 X
6
X
5 Digital inputs/
3 outputs (2)
X
X 2 4
3
1
X
0 2
Channel marking
X (2 fields for each
1
port/channel)
Supply
24 V
U LS U A output (1)
Supply 767-5803
input (1)
Short description: Features:
This digital input/output module records binary signals from switches, sensors • 8 digital inputs/outputs, 24 VDC / 0.5 A
and proximity switches (BEROs)*. The module also controls actuators, such as • Input/output, parametrizable (channel by channel)
magnetic valves, DC contactors and indicators. • Diagnostic-capable (channel by channel/module by module)
• Parametrizable (operating mode, incl. counter, filter, inversion,
* Does not apply to 767-5803/000-800 substitute value strategy, substitute value, manual mode, online simulation
and diagnostics)
Included:
• 1 x WMB marker, orange
• 1 x marking strip
•2 x M12 protective cap

Description Item No. Pack. Technical Data
Unit
8DIO 24V DC 0.5A (8xM12) 767-5803 1 Digital inputs:
8DIO 24V DC 0.5A IF (8xM12)** 767-5803/000-800 1 Number of inputs 8
** Interference-free for safety function applications (see manual) Connection type (2) M12 connectors, A coded, 4 poles
Wire connection 2- or 3-wire
Accessories Item No. Input filter Hardware: ≤ 60 μs
Software: parametrizable
Marking strips, marking pen, spacer see pages 520 ... 521 Input characteristic Type 2, acc. to IEC 61131-2 (767-5803)
module and protective caps Type 1, acc. to IEC 61131-2
IP67 cables and connectors see pages 502 ... 517 + Section 11 (767-5803/000-800)
Signal voltage (0) -3 V ... +5 V DC
Technical Data Signal voltage (1) +11 V ... +30 V DC (767-5803)
+15 ... +30 VDC (767-5803/000-800)
Module supply: Input wiring High-side switching
Connection type (1) M12 connectors, A coded, 4 poles; Input voltage 24 VDC (-3 VDC < U IN < +30 VDC); Power
Derating must be observed from U A is strongly recommended, recovery
Current carrying capacity of supply for voltages > U A
connections max. 8 A (U LS : 4 A, U A : 4 A) Input current (typ.) 7.0 mA (767-5803)
Supply voltage 3.0 mA (767-5803/000-800)
24 V DC (-25 % ... +30 %) Connection of 2-wire BEROs max. 1.5 mA admissible closed current
Logic and sensor voltage U LS
24 V DC (-25 % ...+30 %) Cable length, unshielded ≤ 30 m
Actuator voltage U A
Supply current Input characteristic:
typ. 45 mA (only logic part) Input voltage Typical input current
Logic and sensor current I LS
typ. 75 mA + sensors/actuators 0 V DC 0
Actuator current I A
(max. 800 mA) + load 5 V 2.7 mA (767-5803)
Protection Reverse voltage protection for U LS + U A 0.6 mA (767-5803/000-800)
Short-circuit protection for sensor/actuator 11 V 6.8 mA (767-5803)
supply 15 V 2.6 mA (767-5803/000-800)
24 V 7.0 mA (767-5803)
3.0 mA (767-5803/000-800)
30 V 7.1 mA (767-5803)
3.2 mA (767-5803/000-800)