Page 10 - Gefran - Product range

INVERTER LIFT

Model VDL200 Model AGL50
Control mode Field Oriented Control Control mode Space Vector
Power 4 ... 11kW Power 4 - 5,5 - 7.5 kW (5 - 7.5 - 10Hp)
Voltage 3 x 230-400Vac, -15%+10%, 50Hz Voltage 3 x 400Vac ... 480Vac, 50/60Hz
Motor type Asynchronous
Motor type Asynchronous
Speed control (1)
(Accuracy) ± 0.01% Motor rated speed Speed control (Accuracy) 0.5 … 1%
Analog inputs 1 Analog inputs 1
Analog outputs no Analog outputs 1
Digital inputs 8 + 1 enable Digital inputs 6
Digital outputs 4 (relay)
Digital outputs 3 (1 static and 2 relay)
Overload Up to 200% In * 10”
Overload Up to 170% * In
Max output frequency 300Hz
Max output frequency 500Hz
EMI filter Integrated (VDL200-F models)
(EN 12015; EN 61800-3 category C2 and C3) EMI filter Optional
Choke DC side choke: external optional Choke Optional
AC side choke: external optional
Braking unit Integrated with external resistor Braking unit Integrated with external resistor
Port for SD card no Port for SD card no
Dimensions for room- Dimensions for roomless
less applications yes applications yes
Emergency operation Optional (UPS single-phase 230V)
Emergency operation Optional (with UPS)
Type of lift Geared
Max system speed 1.0 m/s
Installations New installation & Retrofitting
Type of lift Geared
• Speed control
• Short floor management Installations New installation & Retrofitting
• Lift sequence management
• Ramp generation
• Management of up to 8 Multispeeds • 16 multispeeds
• Load compensation • 4 multiramps (linear, S-shaped with inde-
• Configuration via optional keypad (5 lan- pendent jerk settings)
guages) • Self-tuning of motor parameters
Functions • Configuration via PC (GF_eXpress) • Integrated lift sequences
• Wizard for commissioning Functions • Speed expressed in m/s
• Menu for setting electrical and mechanical • Management of space calculated by the
parameters drive, even offline
• Programming with linear engineering units • Management of short floors
• DC power supply or emergency single-phase • Motor contactor control
power supply to return to floor with opti- • Integrated brake control
mized consumption • Temperature control for motor and drive.
• Conforms to UNI EN 81-1:1998 + A3:2009,
article 9.11.3
Serial communication RS485 , Modbus RTU
(2)
Serial communication RS232 (3)
Protection degree IP20
Protection degree IP20
Markings CE Markings CE, UL and cUL

(2) The serial port is used for programming (PC) and control (Modbus communication standard in all drives)
(3) The serial port is used for programming (PC).
10
10