Page 8 - Gefran - Product range

INVERTER AND INVERTER LIFT

Model ADV200 Cabinet Model ADL300-2T ADL300-2M ADL300-4 AVRy
Control mode Field Oriented Control Control mode Field Oriented Control Field Oriented Control Field Oriented Control Field Oriented Control
11kW, 20kW and 27kW
Power 90kW…1.2MW Power 5.5 ... 37kW (7.5 ... 50Hp) 1.1 ... 5.5kW (1.5 ... 7.5Hp) 4 ... 75kW (5 ... 100Hp) (with high voltage motors)
or 7.5kW, 14kW and 17kW
(with standard motors)
Configuration Ready to use 3 x 400Vac,
Basic Voltage 3 x 200Vac, 3 x 230Vac, 50/60Hz 1 x 230Vac; 50/60Hz 3 x 230Vac, 3 x 400Vac, 3 x 480Vac; 50/60Hz
3 x 460Vac, 50/60Hz
Voltage 3 x 380…500Vac, 50/60Hz (-4 models) Motor type Asynchronous / Synchronous Asynchronous / Synchronous Asynchronous / Synchronous Synchronous (PM gearless)
3 x 690Vac, 50/60Hz (-6 models)
Speed control (Accuracy) ± 0,01% Motor rated speed (1) ± 0,01% Motor rated speed (1) ± 0,01% Motor rated speed (1) ± 0,01% Motor rated speed (1)
Speed control (1) Analog inputs ADL300B: 0; ADL300A: upon request (*) ADL300B: 0; ADL300A: upon request (*) ADL300B: 0; ADL300A: upon request (*) 2
(Accuracy) ± 0.01% Motor rated speed Analog outputs ADL300B: 0; ADL300A: upon request (*) ADL300B: 0; ADL300A: upon request (*) ADL300B: 0; ADL300A: upon request (*) 2
ADL300A: upon request
ADL300A: upon request
ADL300A: upon request
Analog inputs 2 two-pole Digital inputs ADL300B: 8 + 1 enable (*) ADL300B: 8 + 1 enable (*) ADL300B: 8 + 1 enable (*) 6
(Voltage/Current)
Digital outputs ADL300B : 4 (relay) (*) ADL300B : 4 (relay) (*) ADL300B : 4 (relay) (*) 4 (2 static and 2 relay)
ADL300A: upon request
ADL300A: upon request
ADL300A: upon request
Analog outputs 2 two-pole Overload Up to 200% In * 10” (up to 11kW) Up to 200% In * 3" Up to 200% In * 10" (up to 22kW) 183% In * 10"
(1 voltage or current, 1 voltage)
Up to 180% In * 10" (≥ 30kW)
Up to 180% In * 10” (≥ 15kW)
Digital inputs 6 (PNP / NPN) Max output frequency 300Hz 300Hz 300Hz 300Hz
EMI filter Integrated (ADL300.-F models) Optional external Integrated (ADL300.-F models) Integrated (EN 12015)
Digital outputs 4 (PNP / NPN), (2 static and 2 relay) (EN 12015, EN 61800-3) (EN 12015, EN 61800-3) (EN 12015, EN 61800-3)
DC side choke: integrated (≥ 30kW), external DC side choke: integrated (≥ 30kW), external optional
Heavy: Async.=150% * In (1’ every 5’); 180% * In (for Choke optional on lower sizes no on lower sizes Integrata (EN 12016)
Overload 0.5”), Sync.=160% * In (1’ every 5’); 200% * In (for 3’’) AC side choke: external optional AC side choke: external optional
Light: Async. and Sync.=110% * In (1’ every 5’) (3) Braking unit Integrated up to 30kW with external resistor Integrated with external resistor Integrated up to 55kW with external resistor no (Regeneration)
Max output frequency 500Hz (depending on drive size) Port for SD card yes yes yes no
Dimensions for roomless
EMI filter yes applications yes yes yes yes
module)
Choke Up to 132 kW: Integrated DC side Emergency operation Optional (UPS or buffer battery with EMS Optional (UPS or buffer battery with EMS module) Optional (UPS or buffer battery with EMS module) Optional (UPS or buffer battery with EMS module)
≥ 132 kW: Integrated mains choke
Max system speed
1.0 m/s
4.0 m/s
3.0 m/s
4.0 m/s
Braking unit Optional Type of lift Geared / Gearless Geared / Gearless Geared / Gearless Gearless
Installations New installation & Retrofitting New installation & Retrofitting New installation & Retrofitting New installation & Retrofitting
Options for integra- The ADL300 is available in two configurations: • The ADL300 is certified for the use of a single • Load compensation • Integrated AFE regenerative technology
tion onboard drive 3 output contactor, in accordance with UNI EN 81- • DCP3/DCP4 protocol communication • Speed control (EFC Elevator Floor Control function)
• ADL300A (Advanced): to guarantee 1:1998 + A3:2009, article 9.11.3 • CANopen communication • Lift sequence
(*)
yes maximum programmability, the ADL300A • Safety Certification for a CONTACTORLESS opera- • CANopen –Lift (Cia® 417) communication • Parameters in linear units
PLC (Motion Drive Programmable Logic Controller, standard is supplied as standard with no I/O or tions: ADL300 is CERTIFIED as EN81-1:1998 + A3
IEC61131-3) feedback cards, leaving the customer free • STO according to EN61800-5-2-2007 - SIL3 • Configuration via keypad with LEDs • Lift mechanical parameters
to perform the appropriate configura- • Configuration via optional keypad (5 languages) • Ramp generation.
Safety Card yes (ADV-...-S, AFE-...-S models) tion, choosing from an extensive range of • Integrated LED keypad • Configuration via PC (GF-eXpress)
options; • Speed control • Wizard for commissioning
• Constant torque and variable torque mode (skip Functions • Position control with direct landing at floor (EPC • Menu for setting electrical and mechanical
size function) • ADL300B (Basic) features the following as Elevator Positioning Control) parameters
• MDPLC advanced development environment (ac- standard: • Automatic calculation of deceleration point • Programming with linear engineering units
Functions cording to IEC 61131-3) - 8 (Prog. DI) + 1 DI (Enable) + 4 (RO); • Short floor management • DC power supply or emergency single-phase
• Programming keypad with 5 complete sets of drive - channels A+ A-, B+ B-, Z+ Z-, differential • Off-floor stop detection power supply to return to floor with optimized
parameters saved line drivers, optoisolated; management • Lift sequence management consumption
• Programming menu in 10 languages. of loss of encoder signals; encoder signal • Ramp generation • External +24VDC power supply
repetition; TTL electrical interface; • Management of up to 8 Multispeeds
RS485 , Modbus RTU. - input for absolute SinCos or Endat / SSI • Regenerative configuration with AFE200 external
(2)
modules
Serial communication Optional: DeviceNet, Profibus DP, CANopen®, GDNet, encoder.
Ethercat, Ethernet IP, PROFINET RS232 , Modbus RTU, DCP3, DCP4, CAN- (2)
(2)
Serial communication open e CANopen Lift DS 417 (ADL300B-...-C RS232 , Modbus RTU, DCP3, DCP4, CANopen and CANopen Lift DS 417 (ADL300B-...-C models). RS485 , Modbus RTU
(2)
Optional: DeviceNet, Profibus DP, CANopen®
Protection degree IP23 or IP54/IP55 models).
Protection degree IP20 IP20 IP20
Markings CE
CE, UL and cUL. Elevator Accessory E365347
Markings certified also evaluated in accordance with CE, UL and cUL CE
ASME A17.5 and CSA B44. Elevator Accessory E365347 certified also evaluated in accordance with ASME A17.5 and CSA B44.
(1) For standard 4-pole motors
(2) the serial port is used for programming (PC) and control (Modbus communication standard in all drives)
8 8