Page 278 - Wago_PCB_TerminalBlocksConnectors_Volume2_2015_US

Accessories
4 Finger Guards and Direct Marking
276 MCS MINI

Finger guard Direct marking Directe marking
pole no. – 1
for male headers
of male and female connectors of male connectors
IP20 for conductor termination for conductor termination

Pole No. Item No. Pack. Unit Marking MCS MINI Marking Perpendicular to Conductor Entry
Item no. suffix: /. . . - 044
Finger guard for male headers, black, Male and female connectors for conductor connection Ordering examples:
3.5/3.81 mm pin spacing can be provided with direct marking of poles from Male connector,
1 - number of poles at the factory. 3.5 mm pin spacing, 6-pole, light gray
4-way 734-420 100 (4 x 25) 734-306/000-044
Two standard marking orientations are available:
1. Marking perpendicular to conductor entry Male connector with fixing flanges,
2. Marking parallel to conductor entry 3.5 mm pin spacing, 6-pole, light gray
734-306/019-044

Other custom marking options are available upon
request. Male connector with fixing flanges and strain relief
plate,
Direct marking of MCS headers with solder pins is not 3.5 mm pin spacing, 6-pole, light gray
possible. WAGO recommends pole marking on the PCB 734-306/019-044/033-000
for these headers.
Female headers with solder pins are exposed to ag-
gressive flux agents during wave soldering. Select inkjet
marking procedures are available upon request for these
items.
Finger guards provide touch-proof protection (IP20).

The marking type is always defined by the second 4-digit
block of the item no. suffix for items with standard colors
and materials.
Example: 734-106/. . . . - xxxx
xxxx = Item no. suffix for marking

Marking Parallel to Conductor Entry
Item no. suffix: /. /. . . - 9034
Ordering examples:
Insert the finger guard into the male header to be Male connector,
protected. 3.5 mm pin spacing, 6-pole, light gray
734-306/000-9034
Male connector with fixing flanges,
3.5 mm pin spacing, 6-pole, light gray
734-306/019-9034
Male connector with fixing flanges and strain relief
plate,
3.5 mm pin spacing, 6-pole, light gray
734-306/019-9034/033-000

Cut finger guard to the required number of poles.
Do not use single-pole covers!