Page 312 - Wago_Rail-MountedTerminalBlockSystems_Volume1_2015_US.pdf

X-COM -SYSTEM
®
6 4-Pin Carrier Terminal Blocks
310

500 V/6 kV/3 1 300 V, 20 AU
I N 32 A 2 300 V, 20 A2
Terminal block width 5 mm / 0.197 in Terminal block width 5 mm / 0.197 in

1 500 V = rated voltage
6 kV = rated surge voltage
3 = pollution degree
250 V/4 kV/3 =
ominal voltage with shield contact
(also see Section 14)
2 See current-carrying capacity curve, page 361 and at
<_ 28,5 mm/ _> 1.12 in <_ 28,5 mm/ _> 1.12 in 3 See application notes for:
www.wago.com
Test plug modules, pages 289 – 290
Staggered jumper, page 295
Push-in type wire jumper, page 295
<___ 46 mm/1.81 in ___> <___ 46 mm/1.81 in ___> 4 Note:
<____________ 87,5 mm/3.44 in _____________> <____________ 87,5 mm/3.44 in _____________> 1-conductor female plug, angled is not suitable.
Pack. Pack. Accessories
Item No. Item No.
Unit Unit
4-pin carrier terminal block, 4-pin ground carrier terminal block,
for DIN 35 rail, acc. to EN 60715 for DIN 35 rail, acc. to EN 60715
gray 769-151 50 green-yellow 769-207 50 Miniature WSB Quick marking system,
10 strips with 10 markers per card,
4-pin carrier terminal block with shield contact, (no 5 mm wide markers
picture), for DIN 35 rail, acc. to EN 60715 plain 248-501 5
gray 769-201 1 50 Miniature WSB Quick marking system, plain,
10 strips with 10 markers per card,
5 mm wide markers
yellow 248-501/000-002
769 Series Accessories red 248-501/000-005
Appropriate marking system: blue 248-501/000-006
Miniature WSB (see Section 13) gray 248-501/000-007
248-501/000-012
orange
End and intermediate plate, 1.1 mm thick Test plug module, light green 248-501/000-017
orange 769-302 100 (4x25) 3 can be snapped together, green 248-501/000-023
gray 769-301 100 (4x25) 5 mm wide violet 248-501/000-024
gray 280-418 100 (4x25) 5
Coding pin, Spacer module, Screwless end stop,
for coding female plugs can be snapped together, for DIN 35 rail,
orange 769-435 100 (4x25) 5 mm wide 6 mm wide
gray 280-419 100 (4x25) gray 249-116 100 (4x25)
Adjacent jumper, insulated, Test plug, Screwless end stop,
I N = I N terminal block with 500 mm cable, for DIN 35 rail,
gray 280-402 200 (8x25) 2.3 mm Ø 10 mm wide
yellow 210-137 50 gray 249-117 50 (2x25)
Alternate jumper, insulated, Test plug adapter, 5 mm wide,
I N = I N terminal block for terminal blocks 1.5 - 4 mm²,
gray 280-409 100 (4x25) for 210-137 test plug 2.3 mm Ø
gray 280-404 100 (4x25)
Staggered jumper, Pin cover,
3 insulated, with receptacle for miniature WSB
Spacing: 5 mm, gray 769-438 100 (4x25)
I N 24 A orange 769-439 100 (4x25)
from 1 to 2 780-452 100 (4x25) 1-conductor female plug,
from 1 to 3 780-453 100 (4x25) 4 straight
from 1 to 4 780-454 100 (4x25) gray 769-101 200
from 1 to 5 780-455 50 (2x25)
from 1 to 6 780-456 50 (2x25) 2-conductor female plug
from 1 to 7 780-457 50 (2x25) gray 769-121 100
from 1 to 8 780-458 50 (2x25)
Push-in type wire jumper,
3 insulated,
I N 9 A,
wire size 0.75 mm²
L = 60 mm 249-125 10
L = 110 mm 249-126 10
L = 250 mm 249-127 10

Certification organizations can be found in the overview on pages 622 and 623.