Page 53 - Parker - Energy Products Division - Multitube (Instrument and Heat Trace Tubing Products)

Process Control & Analyzer Systems
Process Control & Analyzer Systems
Catalog Number 4200-M-2
Back to Table of Contents

CH Series Constant Watt Bundles
Maximum Exposure 400°F (200°C)
Process Tubes 1/4” to 1/2” O.D. (6mm to 12mm)
Single or Dual Tube Designs

Standard Insulation Package *
Minimum
Process Environments Average High / Low Ambient Conditions
Temperature Extreme Cold Cold Moderate Cold Moderate Warm
to Maintain
-65°F Low -40°F Low -10°F Low 0°F Low 10°F Low
80°F High 80°F High 95°F High 105°F High 115°F High
-54°C Low -40°C Low -24°C Low -18°C Low -13°C Low
120 Volts
26°C High 26°C High 35°C High 40°C High 46°C High
250°F (4˚C) 18 Watt / Ft 18 Watt / Ft 18 Watt / Ft 12 Watt / Ft 12 Watt / Ft
275°F (10˚C) 18 Watt / Ft 18 Watt / Ft 18 Watt / Ft 18 Watt / Ft 12 Watt / Ft
300°F (24˚C) 18 Watt / Ft 18 Watt / Ft 18 Watt / Ft 18 Watt / Ft 18 Watt / Ft
325°F (38˚C) 18 Watt / Ft 18 Watt / Ft 18 Watt / Ft 18 Watt / Ft 18 Watt / Ft
350°F (52˚C) 18 Watt / Ft 18 Watt / Ft 18 Watt / Ft 18 Watt / Ft
375°F (66˚C) 18 Watt / Ft 18 Watt / Ft 18 Watt / Ft
400°F (79˚C) 18 Watt / Ft 18 Watt / Ft
208 Volts
250°F (4˚C) 18 Watt / Ft 18 Watt / Ft 12 Watt / Ft 12 Watt / Ft 12 Watt / Ft
275°F (10˚C) 18 Watt / Ft 18 Watt / Ft 18 Watt / Ft 18 Watt / Ft 12 Watt / Ft
300°F (24˚C) 18 Watt / Ft 18 Watt / Ft 18 Watt / Ft 18 Watt / Ft 18 Watt / Ft
325°F (38˚C) 18 Watt / Ft 18 Watt / Ft 18 Watt / Ft 18 Watt / Ft 18 Watt / Ft
350°F (52˚C) 18 Watt / Ft 18 Watt / Ft 18 Watt / Ft 18 Watt / Ft
375°F (66˚C) 18 Watt / Ft 18 Watt / Ft 18 Watt / Ft
400°F (79˚C) 18 Watt / Ft 18 Watt / Ft
240 Volts
250°F (4˚C) 18 Watt / Ft 18 Watt / Ft 12 Watt / Ft 12 Watt / Ft 12 Watt / Ft
275°F (10˚C) 18 Watt / Ft 18 Watt / Ft 18 Watt / Ft 18 Watt / Ft 12 Watt / Ft
300°F (24˚C) 18 Watt / Ft 18 Watt / Ft 18 Watt / Ft 18 Watt / Ft 18 Watt / Ft
325°F (38˚C) 18 Watt / Ft 18 Watt / Ft 18 Watt / Ft 18 Watt / Ft 18 Watt / Ft
350°F (52˚C) 18 Watt / Ft 18 Watt / Ft 18 Watt / Ft 18 Watt / Ft
375°F (66˚C) 18 Watt / Ft 18 Watt / Ft 18 Watt / Ft
400°F (79˚C) 18 Watt / Ft 18 Watt / Ft

* The above heater selection is based upon our standard insulation package, other insulation packages are available upon request.
All CH series products should be installed with temperature sensor and over temperature protection devices to prevent overheating.

How to Use: Note:
The watt-density selected
1) Check to be sure you are using the correct chart.
will maintain the temperature
2) Choose your operating voltage.
indicated at a minimum.
3) Choose the minimum process temperature you want to maintain. Depending upon actual
Note: If temperature is not shown, pick the next higher option. ambient fluctuations, process
tubes size and number of
4) Follow chart across to the ambient Condition that best match your area.
tubes, the maintenance
5) Use the watt-density shown for your part number derivation.
temperature could be higher.

Parker Hannifin Corporation
49 50 Energy Products Division