Page 49 - Parker - Energy Products Division - Multitube (Instrument and Heat Trace Tubing Products)

Process Control & Analyzer Systems
Catalog Number 4200-M-2
Back to Table of Contents

CH— Constant Wattage Electric Trace Tubing —
High Temperature Maintenance

Maintain Temperatures up to 400˚F (204˚C) and withstands Maximum
Internal Exposure to 400˚F (204˚C)

General Heat Transfer Foil
Parker CH Constant Wattage Temptrace™ electric An aluminum heat transfer foil for even heat
trace tubing consists of process tubes traced with a distribution for precise temperature control.
constant wattage heating cable, a heat transfer foil
wrap, a nonhygroscopic glass fiber insulation and a Insulation
black, 105° C rated, flame-resistant PVC (FR PVC) Air-spaced, cross wrapped applied non-hygroscopic
jacket. fiberglass thermal insulation for minimum heat loss.

Parker CH Constant Wattage Temptrace™ is Jacket
designed for various temperature ranges including: The tough, black, 105° C rated, flame-resistant PVC
Process temperature maintenance of 160° (FR PVC) jacket protects the tubing against corrosive
at -40° F (-40° C) ambient temperatures to 400°F atmospheres, water, oils, acids, alkalies and most
(204°C) at 80°F (26.7°C) ambient. Contact the factory chemicals. Additional jacket materials are available
for complete design capabilities for your application. upon request. For Material Specifications of jackets,
see Technical Data Section of the catalog.
Standard product has a Maximum Temperature
Rating (MTR*) of 400° F (204.4° C), Power-On. Testing
Consult Division for details. Each tube in every length of Parker Temptrace™
is pressure tested prior to shipment to assure the
*Maximum Temperature Rating is the maximum instrument engineer a high quality, reliable, trouble-
allowable temperature of the tracing fluid free product. For Testing Specifications, see Technical
Temperatures in excess of this may damage the Data Section of the catalog.
product or alter its performance.
Accessories
Applications Accessories are available for electrical connections,
Analyzer, impulse and instrument lines; small bundle splicing and end terminations. Accessories for
diameter process lines; stack gas sampling lines; and constant wattage bundles are identified in this section.
utility lines.
Ordering
Tubing For information about how to specify and order, see
Type 122 DHP Seamless Copper and 316/316L How-To-Order page.
Welded and Seamless Stainless Steel, FEP, PFA
and PTFE are standard. Special wall thicknesses are NOTE: It is absolutely necessary to seal the ends against
contamination from moisture and/or corrosive liquids. Parker
available upon request. For Material Specifications of
Hannifin cannot assume any liability for product damage
metal tubing, see Technical caused by moisture from unsealed ends.
Data Section.

Tubing Identification
When process tubes are the same size and materials,
each individual tube is printed with tube number at
two-inch intervals or
color code.

Parker Hannifin Corporation
45 46 Energy Products Division