Page 72 - Parker - Fluoropolymer hose and fittings products
P. 72
Catalog 5162F
Catalog 5162F
Hose Assembly & Crimping
PTFE Permanent Series 91, 91N
4 6 7
Die Selection Die & Spacer Ring Crimp
Select proper Parkrimp die Crimp Die – Place die set into Assemble hose – Insert
set. (Reference Crimp Source bowl. hose and fitting from bottom
Instructions, pg. 76 or Crimp- of crimper and up through die
source online at www.parker. set. Position fitting so bottom
com/crimpsource) of fitting skirt rests on die step
(PARKALIGN® feature).
Parkalign Feature
®
5
While holding hose and fitting
Lubricate Bowl Die Ring – Place applicable die in position on die step, crimp
ring on top of die. Position ring
so it is centered on die. fitting onto hose until die ring
contacts base plate.
Warning
Parflex hoses utilize silver die
ring. (Reference Crimp Source Keep fingers and hands away
Instructions, pg. 76 or Crimp- from die-pusher area. Failure
source online at www.parker. to do so may result in personal
com/crimpsource) injury.
Note
Pump on crimper must not
exceed the rated pressure of
the crimper being used. Parker
Using a premium, quality, Hannifin will not accept respon- Technical
lithium-base grease, apply a sibility for the operation of or
thin layer of grease on bowl of provide warranty coverage for
crimper base plate. a crimper that is operated by a
power unit other than equipment
supplied by Parker Hannifin for
the express purpose of operating
the crimper.
69
