Page 76 - Parker - Fluoropolymer hose and fittings products

Catalog 5162F
Catalog 5162F

Hose Assembly & Crimping Hose Assembly & Crimping
PTFE Permanent PAGE Series Field Attachable - 90 Series

CAUTION: There are several different sections for Hose Assembly
and Crimping. Be sure you are in the section that corresponds to
the fitting series you are using. See Table of Contents for listing.

1 2 3

Inspection Assembly Assembly

Hose – Visually inspect both Mount nipple hex in vise. Ensure
ends of hose for square cut. nipple end extends beyond vise
Remove any burrs, loose fibers jaws sufficiently to allow installa-
or wires. tion of hose.

Slide two sockets over end of
hose with bottom of sockets
back to back. Position sockets
at each end of hose.

Push hose bore onto nipple to
size tube and to aid in separat-
Note ing braid before assembling
ferrule onto hose.
When installing sockets on
hose, check hose ends to Once completed, remove hose
determine if wire braid “necks from nipple.
down” (bends inward). If one
end “necks down” use this end
to slide sockets onto hose.

Technical

Fittings – Inspect each com-
ponent for possible damage. In
addition, inspect socket and
nipple for a through-hole and
threads.

73