Page 46 - LD_Catalog_Spring18_NA

Geometric Dimensioning & Tolerancing Geometric Tolerancing Applications and
Fundamentals 1
PD570 ASME Standards Course / Top Seller
GEOMETRIC DIMENSIONING AND TOLERANCING � PUBLIC COURSES This geometric tolerancing program is based on the latest ASME
Y14.5-2009 standard and will make the GD&T concepts easy to
learn and apply.
The training program combines lecture with color animated graphics and
video clips to make it the most engaging class possible. The instructor
also uses wood and plastic models to simulate parts, gages and
inspection equipment. The models are used to demonstrate the physical
mating of parts for engineering and design. The sample inspection
equipment allows hands-on demonstrations of inspection as well as
measurement data reporting practices. After the class lecture is given for
a unit, it is followed by a practical student exercise (either individual or This process links the concept that the proper selection of the datums,
group) to test the participants’ understanding.
All participants receive a copy of the 380-page GeoTol Pro Book and
Pocket Guide, by Scott Neumann and Al Neumann, which contains full
color graphics and is loaded with student exercises.
You Will Learn To
• Demonstrate a thorough understanding of the fundamental
geometric concepts
• Interpret and explain the application of geometric symbols on
drawings
• Explain how to select the datum reference frames properly
• Calculate the position and profile tolerances
Who Should Attend
Engineers, designers, drafters, CAD, quality, inspection, manufacturing,
tooling, production, procurement, purchasing and shop personnel who
need to read engineering drawings
Instructor Scott Neumann
2 Days, 1.5 CEUs, 15 PDHs
Member $1,700 / List Price $1,800
Save up to $960 by enrolling in PD603, a combo course consisting of
this course (PD570) and PD561 “Geometric Tolerancing Applications
with Stacks and Analysis.”
Take This Combo Course and Save Up to $960!
Geometric Dimensioning & Tolerancing Combo Course
PD603
Created to save participants time and money, this course is a back-to-back offering of “Geometric Dimensioning & Tolerancing Fundamentals 1”
(PD570) and “Geometric Tolerancing Applications and Tolerance Stacks” (PD561). Take these courses as a combo and SAVE UP TO $960.
Special Requirements
Participants should bring calculators to class. Participants may also bring drawings to class for discussion.
Instructor Scott Neumann 4 Days, 3 CEUs, 30 PDHs Member $2,365 / List Price $2,465
44 For complete course descriptions and to register, visit go.asme.org/NAtraining or call 1.800.843.2763
Tolerance Stacks
PD561 Top Seller
After taking the introductory GD&T course, students will grasp the
fundamentals of GD&T, such as datums, position with MMC and RFS
modifiers, parallelism, profile, etc. However, they may still lack the
intimate knowledge of how to apply geometric tolerancing expertly
and perform tolerance stacks to define and optimize their product
design. The Applications and Tolerance Stacks course teaches how to
apply GD&T and perform tolerance stacks using a series of case study
problems including sheet metal, machinings, plastic parts, castings etc.
Case studies require students to establish datum reference frames and
apply geometric tolerancing based on defined functional requirements.
They perform tolerance stacks to ensure design requirements are met.
as well as position and profile values on individual parts, have a great
effect on the accumulation in the overall assembly. The exercises are
interactive and discussed in student groups and as a class.
All participants receive a copy of the GeoTol Applications and Tolerance
Stacks book along with an Excel Tolerance Stack Spreadsheet that will
serve as valuable resources long after the training is complete.
You Will Learn To
• Employ the proper interpretation, application and verification using
geometric tolerancing on parts and assemblies
• Perform linear, axial and orientation tolerance stacks
• Reallocate tolerances to meet manufacturing capabilities
Who Should Attend
Engineers, designers and drafters, as well as quality, tooling and
manufacturing personnel
Special Requirements
Participants should bring calculators to class. Participants may also bring
drawings to class for discussion. As a prerequisite, it is recommended
that participants attend the Geometric Tolerancing Fundamentals 1
(PD570) class or have a strong understanding of geometric tolerancing
fundamentals.
Instructor Scott Neumann
2 Days, 1.5 CEUs, 15 PDHs
Member $1,525 / List Price $1,625
Save up to $960 by enrolling in PD603, a combo course consisting of
this course (PD561) and PD570 “Geometric Dimensioning & Tolerancing
Fundamentals 1.”