Page 10 - type de document

EOS 90395-A-PHY-0002-Column feet assembly & setting

IMPORTANT: Notice that the ‘NEW’ Nivell plates should have 10 holes in
each quadrant from which to choose from. You must identify a total of 4

holes, per quadrant that are clear from rebar interference. Two holes on each
opposite side of each quadrant. Mark the holes!

j. As an example, the image to

the right shows the rebar
lines interfering with a total of
5 holes. These holes cannot
be used. However, you still
have 5 holes available from
which you only need four (two
on each side of the
quadrant).

k. You would rather have the
“Preferred” holes available for
drilling but if not, you always
have plenty of “alternatives”.

l. You are allowed to shift the
Nivells in unison with the

crossbar to try to find the
number of holes you need but
always try maintaining
squareness in reference to at
least one of the walls in the room
and try to stay true to the layout
of the room as much as possible