Page 7 - McD_Acrelec NGK32 Pre Installation V1.0 14.03.14_Neat

Lift? Dimensions? Capacity?

Door widths and heights?

Security Physical security issues?
Who are key holders?

Health & Safety Hours of access?
Restricted hours for delivery/installation?
What is the strategy to protect customers,
staff and contractors?

Restricted areas cleanliness/hygiene?

Any other Slippery surfaces?
issues? Sharp edges?
Fire exits not to be blocked?
Document any issue that may affect
delivery or installation.

1.7 Power and Network Cables (this is a prerequisite for McDonald’s)

Power is required to each side/face of the kiosk. LAN connections are required for each side/face of
the kiosks and in some cases also to the EFT device. (Not included in this installation process)

Each Double kiosk NGK 32” requires:
 1 x Power cable and up to 4 x LAN cables (2 x LAN kiosk, 2 x LAN spares)

 A route for the power cable from the restaurant main power supply to the kiosk location,
with the correct electrical plugs is required with some slack cable.

 A route for the LAN cables from the restaurant main switch to the kiosk location, with the
correct LAN connections is required with some slack cable.

Each Wall Mounted kiosk NGK 32” requires:
 1 x Power cable and up to 2 x LAN cables (1 x LAN kiosk, 1 x LAN spares)

 A route for the power cable from the restaurant main power supply to the kiosk location,
with the correct electrical plugs is required with some slack cable.

 A route for the LAN cables from the restaurant main to the kiosk location, with the correct
LAN connections is required with some slack cable.

These connections are McDonald’s responsibility and must be available in the ceiling, wall or floor
at the precise location of the kiosk its self, before the installation of the kiosks so that the
connections can be made quickly and easily.

7|Page