Page 8 - Toro Product Guide_2020.cdr

Rotary Angle Broom RAB-MX-7200

Fits Toro Groundsmaster 7200, 7210 & 360

RAB-MX-7200 Features
- The main pivot and mount frames are constructed
from 1/4" and 3/8" laser cut steel.
- The center pivot pin is 1-1/2" OD 4140 hardened
solid rod. It is supported by two brass bushings
and serviceable with a grease nipple.
- The broom hood is formed from 12-gauge steel
plate.
- The broom head side plates are constructed
from 1/4" laser cut steel plate.
- The broom head frame side plates are connected
with a 2-1/2" square tube with 1/4" wall.
- The A-Frame mount and pivot frames are built A-Frame & Center Pivot Pin
using 3/16" and 3/8" laser cut steel plate.
- The broom is powered by a premium quality PTO shaft.
The shaft is outfitted with two Constant Velocity (CV) Joints.
These joints are crucial in reducing vibration and improving
performance. The PTO shafts and joints are serviceable
with grease nipples.
- The Broom comes complete with hoses and pioneer couplers.
- The broom hydraulic angle is powered by a 2" hydraulic ram.
The ram angle speed is controlled by means of a needle valve.
- The ram has a 1" shaft and is connected to the pivot frame
with 1" diameter pins and is serviceable.
- The broom uses a 24" diameter poly bristle with a 6-3/8"
ID core. Tri-Drive Spindle
- The bristles are mounted on a Tri-Drive Spindle. The Tri-Drive
Spindle is fabricated using 14-gauge steel and is suspended
by two 1-1/2" shafts and is assembled using a CNC lathe table
to ensure perfect balance. This dramatically reduces broom
vibration and increases performance and durability.
- The Tri-Drive Spindle is attached to the broom head frame
side plates with two 1-1/2" heavy duty serviceable flange
bearing.

Bristles Mounted on Tri-Drive Spindle

Hydraulic Ram

8 Needle Valve