Page 48 - QR KLINDEX EXPANDER850AT-RXt

STARTING AND STOPPING

9 Starting and stopping

9.1 Before starting the appliance Error B
Stop B
Error A
Stop A
RF Busy
Power
Working

l WARNINGS

– Before using the appliance, carefully – release the radio control emergency button turning
read this manual and make sure that it to the right
you have understood every section.
STOP
– Always use appropriate PPE as de-
scribed in section "Protective clothing" – select "Grinding" by setting the main dial on the
on page28. electric panel to position "2", the "Grinding power
OK" light activates. If the "Grinding power OK" light
– Ensure that the work area is free of ob- does not activate, check the electrical power supply
jects and/or people that could hinder and check the relative phases
the normal appliance operating process
and would expose them to the risk of – release the emergency button of the electric panel
serious injury. by turning it to the right

– Never leave the appliance unattended – the "PLC ready" light activates
during use.

Before starting the appliance, carry out the checks de- OFF PLC GRINDING TRANSPORT
scribed below: 12 READY
– check that the appliance is assembled correctly and POWER OK MODE

there is no sign of any damage or malfunctions, see OK
the section "Assembly" on page 17
– move the appliance to the work area using one of LOW
the methods described in the section "Moving to
the site/work area" on page 20 Acting on the radio control:
– only now can the caster wheel be removed as de- – insert the key
scribed in the section "Fitting/removing the cast- – the display shows the message: “IMET Stand-by”
er wheel" on page 17 – press and quickly release the reset button to switch
– check that the wheels are secured to the drive
mechanism of the appliance as described in section on the radio control
"Wheel drive locking system" on page 27
– connect the appliance to the mains power network
as indicated in the section "Connecting to the pow-
er socket" on page 24.

9.2 Starting the appliance using the * * * * * * * * * *IM* *E*T* * * * * * * * *
radio control SP: * * * * * SHtzand-TBTy. * * * * *
SW: * * * * * OL: * * * * *
To start and control the appliance using the radio con-
trol, act as follows: WB: * * * * * * * * * * * * * * *
– check that the radio transmitter is connected to the

appliance control plug and that the battery in the
radio control is in place and fully charged

l NOTICE
If the reset button is pressed and held, the
radio control will switch on in program-
ming mode.

34 www.klindex.com - Made in Italy