Page 50 - QR KLINDEX EXPANDER850AT-RXt

STARTING AND STOPPING

Semiautomatic mode – turn the "WHEELS BALANCE" knob to the right if the
– Set the switch to "SEMIAUTOMATIC" appliance tends to move to the left, turn it to the left
– the message “SEMI-AUTO (Forward)” will appear if the appliance tends to move to the right.

on the display. The appliance can only move for- 0
wards and not backwards
RIGHT Max DX: WB: 100% =>
SEMIAUTOMATIC Max SX: WB: <= 100%
PAUSEAUTOMATIC
RECORD
SEMI-AUTO (Forward)
SP: * * * * * Hz TT. * * * * *
SW: * * * * * OL: * * * * *
WB: * * * * * * * * * * * * * * *

MODE

– turn the knob to select the most appropriate rota-
tion speed of the planetary based on the type of op-
eration to be carried out (see the section "Rotation
speed and direction" on page 31)

– select the direction of rotation of the planetary;
-- to the left, rotation starts in an anti-clockwise di-
rection
-- middle, motor off
-- to the right, rotation starts in a clockwise direction
MANUAL WHEELS BALANCE
RESET

LEFT

– turn the "SWING" knob to the right to activate the
function or increase the swing

– turn the "SWING" knob to the left to deactivate the
function or decrease the swing.

Max: SW: 0000
Min: WB: 78

SWING

SPEED STOP l NOTICE
If the knob is set fully to the left (SW: 78),
the swing function is deactivated.

LEFT RIGHT

PLANETARY The swing radius increases as the appliance speed in-
creases.
– turn the "SPEED" knob to adjust the speed in re- The swing consists of three phases:
lation to the previous speed selected; turn it in a – left swing: SWL1
clockwise direction to increase the speed, and in an – realignment: SWR2
anticlockwise direction to reduce the speed – right swing: SWL3

SWR2 SWL3

Max: SP: 70,0 Hz SWL1 SWING DX
Min: SP: 2,5 Hz
SWL1 SWING LEFT SIDE
SPEED SWR2 SWING RIGHT SIDE
SWL3 SWING LEFT SIDE
SWING SX

l NOTICE
If the knob is set fully to the left, the appli-
ance will not move.

36 www.klindex.com - Made in Italy