Page 113 - MRF Training TJ MRF Manual Version 5 22042024 final April 24_Neat

Operating Aggregate Crushers (IMPACT/JAW)

Operative will be externally trained and
competent and have read the RA’s and
SSW’s relevant to the job they are
undertaking.

Staff will wear all the necessary PPE provided
and instructed.

Follow all safety instructions given and not put
themselves at risk.
Ensure that they make eye contact before
entering the danger zone of any machine or
vehicle within the working environment.

Daily Checks

Complete a daily walk around safety Check for people nearby and
inspection of your machine that will Observe all conveyors are running continue with start up
include checking fluid levels before Check that the movement alarm and centrally without rips or tears. procedure if safe to do so.
completing a defect sheet-any e stops areworking
defects should be reported to your Are bearings ok and greased. Pedestrians must be 5
manager and rectified as necessary. meters away before starting

Basic Start Up Procedure

Start engine on slow idle for Before starting the engine,
Start Work 5minutes before full power is Confirm that all levers and ensure that all bystanders are a
switches are in neutral
engaged. safe distance away 5 metres.

Clearing Blockages

Allow the engine to Climb down from the
Remove the key from idle for 5 minutes to machine using three
Ensure machine is in a any other mobile cool the engine and Ensure you have the points of contact whilst
safe area away from plant nearby and Return all control turbo. keys in yourpocket using the handrails and
other machines ensure the manager levers to neutral Remove the Key. and deal with the steps provided.
operating of the site is aware of blockage
the situation. Review section 7 of Check for nearby people
this SSW before re-starting.

Page 112 of 181

Reviewed April 2024