Page 40 - Demonstrating skill coppysaved colored-converted
P. 40

3.3.4.6 Rubber sheets
                       Rubber sheets are cleansed by placing them on a flat surface and scrub with soap and
                       water
                       They should be rinsed well and hanged on rods to dry
                       Plastic articles care for the same way as rubber articles
                       When not in use it should be powdered rolled and stored


                        3.3.4.7 Care of rubber goods
                        Rubber Bags
                       Rubber bags such as hot water bottles, ice bags, or ice collars should be drained and
                       dried.
                       They should be inflated with air and closed to prevent the sides from sticking together
                       Rubber tubing's
                       Rubber tubes should be washed with warm, soapy water
                       The inside of the tube should be flushed and rinsed well
                       They should be taken not to bend or kink tubes as the will ruin them
                       They should be hanged over a rod to dry
                       The clamp should not be left on the tubing
                       Adhesive marks are removed by rubbing with ether or benzene
                       After cleansing properly, tubing's should be put away by rolling loosely
                       Rubber tubes are sterilized for 15 minutes on autoclaving
                       Rubber Gloves
                       Rubber gloves should be rinsed in cold water then washed thoroughly in soap and warm
                       water on both sides.
                        Disinfectants may be used depending on Procedures
                       They should be ride by hanging or by wiping them with towels
                       Rubber gloves should never be dried on direct heat nor allowed to come in contact with
                       fire, oil, and acid as these things ruin them
                       To sterilize gloves, they should first be washed and dried
                       They should be tested for holes, be powdered, and put in glove cases after which they
                       are sterilized in an autoclave.


                       3.4 Discharging the patient from the hospital
                     Send admission chart to the registration office
                     Assist patient to dress up
                     Collect personal belongings of the patient
                     Instruct patient about medication, treatment, and follow up
                     Check recipient before sending patient

                                                                                                           26
   35   36   37   38   39   40   41   42   43   44   45