Page 1564 - Workshop Manual - Aumark (BJ1051)

77-22
Internal/external trimming parts-top-roof trim panel

7. Install the top-roof trim panel
assembly
(a). Install the 4 fixing buckles of the
top-roof trim panel as shown in the
illustration.
(b). Install the expansion screws of the
top-roof trim panel.
NOTICE:
The expansion screw is a disposable part and
a new one shall be replaced with during the
installation.

8. Install the reinforcement plate of
77
top-roof trim panel (Half vehicle)
(a). Install the 4 fixing nuts of the
reinforcement plate of top-roof trim
panel.

9. Install the right roof handle
(a). Install the right roof handle and screw
down the 2 cross nuts.

10. Install the front column shield/grab handle (Refer to “Chapter 77 Internal/External
Trimming Parts-Front Column Shield/Grab Handle, Replacement”)
11. Install the front dome light/inside mirror (Refer to “Chapter 77 Internal/External
Trimming Parts-Front Dome Light/Inside Mirror, Replacement)
12. Install the sun visor (Refer to “Chapter 77 Internal/External Trimming Parts-Sun
Visor, Replacement)
13. Inspect whether each connection is firm.

Page 1564