Page 508 - Workshop Manual - Aumark (BJ1051)
P. 508

04-364
                                                      Diagnosis-Power Windows

                                                                (c)     Disconnect connector of parking brake
                                                                        indicator light switch.


















   4



               (d)    Ignition switch: ON.
               Check if parking brake indicator light goes out.
               Yes >   Replace parking brake indicator light switch.
               No >    Go to step 2.
               2.     Checking for parking brake indicator light signal circuit short
               (a)    Ignition switch: OFF.
                                                                (b)     Disconnect connector of combination
                                                                        meter B034.













                                                                (c)     Use a multimeter to measure resistance
                                                                        to ground of connector pin 1 of parking
                                                                        brake indicator light switch C026.
                                                                        Resistance: >1MΩ










               Is check result normal?
               Yes >   Replace combination meter assembly.
               No >    Repair signal line to ground short between connector pin 1 of parking brake indicator light
                      switch C026 and connector pin 11 of combination meter B034.










                                                                                                         Page 508
   503   504   505   506   507   508   509   510   511   512   513