Page 36 - 26306

38 #26306-EYAL - 26306-EYAL | 2 - A | 18-08-14 | 12:05:15 | SR:-- | Black 26306-EYAL - 26306-EYAL | 2 - A | 18-08-14 | 12:05:15 | SR:-- | Yellow 26306-EYAL - 26306-EYAL | 2 - A | 18-08-14 | 12:05:15 | SR:-- | Magenta 26306-EYAL - 26306-EYAL | 2 - A | 18-08

Cables Functional CHECK
indicates an open measurement circuit NOTE WARNING
(Fig. 7). Measurement cable with attached lip clip Y-MK1-431
en ERROR message indicates that the NOTE en
and file clip constitute Applied Parts of device is not functioning properly.
the device. If the device functional CHECK is OK,
then you have to proceed to the cables
functional CHECK.
7.4.2 Starting Length Determination

• Connect the file clip and the lip clip to the • Connect the measuring cable to the device
measurement cable. (Fig. 32). 3
• Before connecting the measurement cable with
attached lip clip and file clip to the patient, make
sure that the measurement cable is plugged into
device receptacle.
• Place the lip clip on the patient's lip on the Fig. 31 Device ERROR message
Fig. 7 Measurement circuit is open opposite side of the tooth to be treated.
• Insert the file into the root canal and clamp For assistance call your local distributor
the file clip to the file (Attach the file clip on the or VDW GmbH directly.
To close the measurement circuit and starting the metal part – directly
length determination respectively, see underneath the plastic
next chapter 7.4.2. handle).
• Disconnect the tester from the device and
Optional cable connection test prepare the test of the cable with accessories.
From time to time it is recommended to check the Fig. 32 Connect the measuring cable
cables.
• Connect the file clip contact to the lip clip NOTE
• Insert the file clip and lip clip (or use instead
Touch probe (included in the accessories of the lip clip a second file clip) in the measuring
The connector symbol and the lip clip/file set) for convenient measuring in the cable.
clip symbols will turn green indicating proper molar region. It is rather easy to handle • Connect file clip and lip clip (or a second file clip)
connection (Fig. 8).
as it is not necessary to fix the file clip to the contact strips on the tester as shown on the
to the measuring file, simply touch the screen (Fig. 33).
metal part of the measuring file with the
fork shaped end of the probe.

Two initial beeps indicate closed measurement
circuit and beginning of length determination. The
file movement in the canal is shown on the full
canal image in the left part of the screen (Fig. 9).

Fig. 8 Cable connection test

Fig. 33 Connect file clip and lip clip to tester

Endo Easy Efficient ®

#26306-EYAL - 26306-EYAL | 2 - A | 18-08-14 | 12:05:15 | SR:-- | Black 26306-EYAL - 26306-EYAL | 2 - A | 18-08-14 | 12:05:15 | SR:-- | Yellow 26306-EYAL - 26306-EYAL | 2 - A | 18-08-14 | 12:05:15 | SR:-- | Magenta 26306-EYAL - 26306-EYAL | 2 - A | 18-08-14 | 12:05:15 | SR:-- | Cyan #

Y-MK1-431

4