Page 44 - GuardII+ Series 4208 Platform User Manual

User Instructions

6.3. GuardII+ Configuration

Now that the GuardII+ has been attached to an asset, it can be configured, but each
technology will have its own configuration requirements. Refer to the appropriate technology
User Manual for configuration details.

• To start configuration, select the GuardII+ monitor and technology to configure, and
then press ‘Configure’. IAM will connect to the monitor and show the configuration for
that monitoring technology.

Figure 6-6 Configure GuardII+

6.4. Data Download

Periodically, the Archive should be downloaded into the computer using the IAM software
and the measurement data can be reviewed. This allows for early detection of any Asset
problems indicated by the measurement results, as well as detection of any GuardII+ problem
should it occur.
NOTE:
To directly download data, IAM must have an open database that has the
correct monitor connected to an asset.
When importing data from a USB drive, IAM can create the appropriate
asset if one does not already exist.

For trending purposes, it is better to keep adding measurement results to
the same database rather than create a new one after each download.

NOTE:
The recommended data download and review interval is not greater than
six months.

38
www.irispower.com