Page 48 - GuardII+ Series 4208 Platform User Manual
P. 48
User Instructions
relay is programmed for Momentary Normally-Open operation, holding the button for
10 seconds will force the relay closed until reset.
6.5.2. Online/Offline Button
The Online/Offline button is used to toggle the GuardII+ state between Online and Offline.
As described in Section 4.1, the normal operational state of the monitor is Online, and
when Offline, GuardII+ is not performing any measurements.
WARNING:
The monitor MUST be online for normal operation.
If GuardII+ is turned on, but has been offline for more than 24 hours, it will
automatically go online.
6.6. IAM Utilities
The IAM software provides a set of utilities for use with the GuardII+. These are accessed
by selecting the monitor, and then pressing the Device Utilities button.
Figure 6-12 IAM Device Utilities
Pressing one of the Utility buttons will run that Utility.
42
www.irispower.com
