Page 49 - GuardII+ Series 4208 Platform User Manual

User Instructions

Figure 6-13 IAM Device Utilities

6.6.1. Reboot Instrument
This utility will simply re-start the GuardII+. Once the utility is run, it will take a few minutes
before the monitor will start taking measurements again.

6.6.2. Delete Archives

This utility will delete all the Archives that are currently saved on the GuardII+. This does
not affect the current state of the Triggers or measurements that have already been
downloaded and/or imported into the computer with the IAM software; only measurement data
that is stored in the monitor is deleted.

WARNING:
Once the Archive is deleted in the GuardII+, it cannot be restored; do not
use this utility unless you are sure that you do not need the Archived data
anymore.

6.6.3. Clear Trigger History
GuardII+ uses Triggers to determine when to archive data; the Triggers analyze
measurement results looking for specific data patterns and storing data that matches those
patterns. This utility will reset the Trigger analysis for all monitoring technologies. The
GuardII+ will begin taking measurements as if no Triggers have ever occurred before. This
does not affect the Archived or downloaded measurements; it only resets the Triggers.

WARNING:
Once the Triggers are reset in the GuardII+, they cannot be restored back
to the previous status; do not use this utility unless you are sure that you
want to start the Triggers over again.

43
www.irispower.com