Page 1076 - 2006 HARLEY FLSTCI SERVICE MANUAL

8.22 8-37

Figure 8-45. License Plate Bracket Figure 8-46. Tail Lamp Connector Cover

5 2
4 2006 Softail: Electrical
6 1 3

3
2 Tail Lamp Connector Cover
1
Reflector Bolt Clamp Washer Fasteners (2) Fastener Clip

10759 1. 2. 3. 4. Nut 5. 6. 10734 1. 2. 3.

TAIL LAMP: FLSTSC/FLSTN
5
2

BULB REPLACEMENT See Figure 8-44. To change a bulb, remove the lens, turn the bulb 1/4 turn while pressing the bulb into the housing, and remove the bulb. Replace the bulb and install the lens. NOTE If after replacing a bulb, the tail lamp will not light, check the wiring, the ground at the socket, and/or the switch. TAIL LAMP REPLACEMENT Remove rear fender. See 2.37 REAR FENDER: FLSTSC or 2.38 REAR FENDER: FLSTN. See Figure 8-45. Remove reflector (1). Remove license plate bracket fasteners (6). Remove bolt (2), washer (4) and nut (5) securing clamp to license plate bracket. See Figure 8-46. Remove fastener (1). Disengage tail lamp connec

HOME 1. 2. 3. 4. s0282x8x 1 3 1. 2. 3. Lens 4. Nuts (3) 5. 6.