Page 1108 - 2006 HARLEY FLSTCI SERVICE MANUAL

8.36 Switch stud 8-69

Figure 8-89. Neutral Switch Location Figure 8-90. Neutral Switch Test neutral switch for proper operation. Turn ignition switch to IGNITION position. Verify that transmission shifter is in NEUTRAL. Check to see that NEUTRAL indicator light illumi- For all models except FLSTSC, install rear exhaust pipe. 4.9 EXHAUST SYSTEM: FXST/FLST/FLSTC/ FXSTB/FXSTS, 4.10 EXHAUST SYSTEM: FXSTD/ FLSTF or 4.11 EXHAUST SYSTEM: FLSTN as appropri- 2006 Softail: Electrical

s0279x8x d0322x8x O-ring a. b. c. nates. See ate.

5. 6.

NEUTRAL SWITCH See Figure 8-89. The neutral switch is located on the trans- mission top cover. The two terminal switch is normally open. When the transmission shifter is in neutral and the ignition switch is in the IGNITION position, the switch causes the NEUTRAL indicator light to illuminate. CAUTION Cover transmission top cover with masking tape while performing this task to prevent scratching chrome parts. For all models except FLSTSC, remove rear exhaust pipe. See 4.9 EXHAUST SYSTEM: FXST/FLST/FLSTC/ FXSTB/FXSTS, 4.10 EXHAUST SYSTEM: FXSTD/ FLSTF or 4.11 EXHAUST SYSTEM: FLSTN as appropri- Make sure transmission shifter is in NEUTRAL. See Figu

HOME GENERAL REMOVAL 1. ate. 2. 3. switch studs. 4. appendix. 1. 2. 3. 4.