Page 1109 - 2006 HARLEY FLSTCI SERVICE MANUAL

8.37

Figure 8-91. Oil Pressure Switch

2
Oil pressure switch Connector jumper

1

s0269a3x 1. 2.

the low oil pressure indicator light. The oil pressure switch is
B.4
sure in the crankcase. If the oil pressure drops below 3 psi
See Figure 8-91. The oil pressure switch monitors oil pres-
(20.6 kPa), the oil pressure switch is tripped and illuminates
OIL PRESSURE SWITCH

located on the right side of the crankcase. See Figure 8-91. Remove connector jumper (2) from oil Using a 15/16 in. open end wrench, remove switch (1) NOTE Perform step 1 only if original switch is being re-installed. New switches have a sealant contact patch on the threads. If new switch is being installed, begin at step 2. Coat threads of oil pressure switch with LOCTITE PIPE SEALANT WITH TEFLON (PST). See Figure 8-91. Install oil pressure switch (1) to crank- Tighten switch to 96-144 in-lbs (10.8-16.3 Nm). Attach connector jumper (2) to oil pressure switch. Test oil pressure switch for proper operation. NOTES If connector

GENERAL REMOVAL pressure switch (1). from crankcase. INSTALLATION case.

HOME 1. 2. 1. 2. 3. 4. 5. 8-70