Page 1191 - 2006 HARLEY FLSTCI SERVICE MANUAL
P. 1191

Maximum aft rotation Maximum forward rotation Clamping surface line
                                                     3                 Figure 2-12. Brake Clamp Horizontal Alignment




                                                 2
                                     1
               9965
                                                               1.  2.  3.











                    Pull grip back about 1/8 in. (3.2 mm). Slide throttle control grip onto handlebar until it bottoms. Push throttle and idle control cable inserts into the lower switch housing and Install new c-clips.  NOTE The smaller idle cable insert is gold while the larger throttle cable insert is silver. The inserts only fit their corresponding Fit cable barrels through the notches in the throttle con- trol grip and rout the cables in the grooves. Lengthen throttle and idle cable adjustors. Loosely assemble handlebar clamp to brake control lever bracket master cylinder and reservoir.  CAUTION Front brake master cylinder reservoir fits into a machined relief










              Installation           hole in the switch housing.     See                          a.     See   bracket.   freely.  d.   a.   be tighter.  bracket.


          HOME    1.   2.                3.   4.  5.                 6.                     7.           b.      c.         8.           b.      9.      2-16
   1186   1187   1188   1189   1190   1191   1192   1193   1194   1195   1196