Page 1194 - 2006 HARLEY FLSTCI SERVICE MANUAL

2-19
4

Figure 2-16. Clutch Side Turn Signal

5 2006 FLSTFSE 2 : Chassis

6 7

3
Set screw Ball stud Jam nut Acorn nut
2 Turn signal bracket Lamp housing Lock washer
f2098x2x 1 1. 2. 3. 4. 5. 6. 7.

install left rear view mirror stem through clutch lever
See Figure 2-16. Slide small washer on mirror stem and
bracket and turn signal bracket (3). Install lock washer

CAUTION Gently turn handlebars full right and full left while check- ing that turn signals do not contact and damage fuel Align turn signal mount brackets and adjust rear view mirrors for rider posture. Tighten acorn nut to 60-96 in- If necessary, adjust bullet housings to turn signal brack- Connect negative battery cable to battery. 1WARNING 1WARNING After installing seat, pull upward on front of seat to be sure it is in locked position. While riding, a loose seat can shift causing loss of control, which could result in 1WARNING 1WARNING After repairing the brake system, test brakes at low speed. If brakes are not operating properly, t

(6) and acorn nut (7). tank. Raise handlebars to obtain clearance. lbs (6.8-10.8 Nm). ets. See 8.2 TURN SIGNAL. death or serious injury. (00070a) Install seat. See 2.16 SEAT. result in death or serious injury. (00289a) Softail Models Service Manual. switches for proper operation.

HOME 5. 6. 7. 8. 9. 10. 11. 12. 13. required.