Page 1198 - 2006 HARLEY FLSTCI SERVICE MANUAL
P. 1198
2-23
CAUTION To prevent dirt and other contaminants from entering the master cylinder reservoir, thoroughly clean the cover Drain additional clutch fluid from master cylinder/reser- Remove screws securing master cylinder cover. Remove cover and gasket. Turn housing upside down to remove remaining clutch fluid from reservoir. 1WARNING 1WARNING Always wear proper eye protection when removing retaining rings. Use the correct retaining ring pliers. Ver- ify that the tips of the pliers are not damaged or exces- sively worn. Slippage could propel the ring with force which could cause death or serious injury. Remove retaining ring from pivot pin groove.
DISASSEMBLY before removal. 1. voir. 2. 3. ating the clutch). 4. save pivot pin and clutch lever. 5. Remove piston and spring. 6. the master cylinder housing. sages. 7. housing if necessary. 8. or general deterioration.
3
4 5
2
1 Figure 2-17. Clutch Master Cylinder/Reservoir
7 Cover hold down screws
6 Steel/rubber washers
8 Clutch hand lever Banjo fitting Clutch fluid line Handlebar clamp Clamp screw
9 Cover Banjo bolt Washer
HOME v0035x2x 10 1. 2. 3. 4. 5. 6. 7. 8. 9. 10.

