Page 1196 - 2006 HARLEY FLSTCI SERVICE MANUAL

2-21

tank. Raise handlebars to obtain clearance.

from connectors on main harness. tail Models Service Manual. Connect console wiring connectors. Connect negative battery cable to battery. death or serious injury. (00070a) Install seat. See 2.16 SEAT. Softail Models Service Manual. switches for proper operation. Apply brake lever to test stop light lamp.
CAUTION Gently turn handlebars full right and full left while check- ing that turn signals do not contact and damage fuel Connect all left and right side hand control connectors Replace wire conduits in frame clips and cable wrap. Slide fuel tank forward and replace fuel tank fasteners, vent, fuel supply fitting. See FUEL TANK: EFI in the Sof- Connect fuel pump module connector and fuel gauge Replace instrument console. See SPEEDOMETER: ALL BUT FXSTD in Softail Models Service Manual. 1WARNING 1WARNING After installing seat, pull upward on front of seat to be sure it is in locked position. While riding, a loose seat can shift causing loss of control

10. 11. 12. 13. connector. 14. 15. 16. 17. 18. 19. 20. 21.

8.4 (1.2-2.3 Nm). See

CAUTION Improperly aligned handlebars can contact the fuel tank when turned to the left or right. Contact with the fuel tank can cause cosmetic damage. (00372a) Set handlebars on lower clamps so that bars rest on top of tachometer cover and loosely install tach bracket/han- dlebar clamp, tachometer and fasteners. CAUTION Never adjust handlebars using excessive force. Doing so NOTE If handlebars are positioned for a rider of normal size, post- pone adjustment until rider has checked their position. If cus- tomer requests changing handlebar position, perform the adjustment before delivering the motorcycle. Center handlebars laterally (sideways

INSTALLATION may result in damage to handlebar. rear of the clamps. fastener to 10-20 TACHOMETER. housings. See TROLS. brackets. See 8.2 TURN SIGNAL.

HOME 1. 2. 3. 4. 5. a. b. 6. 7. 8. 9.