Page 476 - 2006 HARLEY FLSTCI SERVICE MANUAL
P. 476

B.5                           9297                              9302                               9301                                           B-13 Appendix B




                                                  Figure B-20.  Remove Wire Lock     Figure B-21.  Remove Terminal Lock  Figure B-22.  Gently Pry Away Tang
























                                                                               B.6 PACKARD




                               DELPHI ELECTRICAL CONNECTORS  Use these instructions to service the following connectors:  REMOVING SOCKET TERMINALS  NOTE  Although the parts of the different Delphi connectors vary in appearance, the instructions which follow will work for all. The only exception is the oil pressure sender connector [139B], the terminals of which are removed like the Packard push-to- Therefore, see Section  ELECTRICAL CONNECTORS,  150 METRI-PACK SERIES, Bend back the external latch(es) slightly and separate If present, free one side of wire lock from ear on wire end of socket housing, then release the other side. Release wires from channels in wire














                       GENERAL  Ignition Coil [83B]  Front Fuel Injector [84B]  Rear Fuel Injector [85B]  IAC [87B]  TP Sensor [88B]  IAT Sensor [89B]   ET Sensor [90B]  Security Siren [142B]  seat connectors.  to remove/install terminals in this connector.  pin and socket halves of connector.   housing. See Figure B-20.  Figure B-21.




          HOME                  ●  ●  ●  ●  ●  ●  ●  ●                                 1.   2.        3.     4.
   471   472   473   474   475   476   477   478   479   480   481