Page 859 - 2006 HARLEY FLSTCI SERVICE MANUAL

See 3.17 TOP END OVERHAUL: ASSEMBLY.
Install push rods, lifters and lifter covers. Install rocker arm support plate. Install breather assembly. Continue with vehicle assembly as directed.
INSTALLATION OVERVIEW

1. 2. 3. 4.

bled during the installation procedure. Assemble the lifter
With the exception of the lifter covers, all parts will be assem-

CAUTION O-rings that are missing, distorted, pinched or otherwise damaged will result in either oil leakage or low oil pres- sure. Use of the wrong O-ring will have the same results. Since many O-rings are similar in size and appearance, always use new O-rings keeping them packaged until use See Figure 3-100. Obtain three new o-rings (1, 7 and 9). Apply a very thin film of clean H-D 20W50 engine oil to Install new small O-ring (1) on seat at the top of the Slide the spring cap (4), spring (5), flat washer (6) and new intermediate size O-ring (7) onto the body of the upper push rod cover. Move parts up body until spring cap (4) contact

HOME ASSEMBLY covers as follows: to avoid confusion. 1. O-rings before installation. 2. upper push rod cover (2). 3. 4. 5. push rod cover. 3-72