Page 902 - 2006 HARLEY FLSTCI SERVICE MANUAL

d0213x3x 3 3-115
Hex on collet shaft 1 2

5 2006 Softail: Engine
Flat 8
Hex Clockwise Figure 3-155. Expanding Collet By Turning Holding collet to prevent lateral movement, finger tighten hex nut until Nice bearing contacts support plate. See Figure 3-155. Using a 7/16 in. open end wrench, hold flat on collet to prevent rotation. Using a second 7/16 in. open end wrench, expand collet by turning hex at end of shaft in a clockwise direction. Expandable end of collet makes contact with needle bearing ID. 7

Expandable end Figure 3-156. Camshaft Needle Bearing Remover/Installer (Part No. HD-42325)
9. 10. 2 3

1 Installer 6. Nice bearing 7. Hex nut 8. Graphite lubricant 9.

SPECIALTY TOOL

CAM NEEDLE BEARINGS Camshaft needle bearing remover/installer Obtain the CAMSHAFT NEEDLE BEARING REMOVER/ INSTALLER (Part No. HD-42325). See Figure 3-156. Remove four thumb screws (1) from threaded holes in support plate (2), if installed. Sparingly apply graphite lubricant (9) to threads of collet (3) to prolong service life and ensure smooth operation. Slide collet through support plate so that threaded end exits stamped side of plate. Aligning two large holes in support plate with needle bearing bores, hang right side of plate on ring dowel in crankcase flange. Align four holes at corners of support plate with threaded holes in crankcase flang

HOME Removal PART NO. HD-42325 1. 2. 3. 4. 5. 6. 7. 8. s0225x3x 8 7 6 5 Threaded 1. 2. Collet 3. 4. 5.