Page 916 - 2006 HARLEY FLSTCI SERVICE MANUAL
P. 916

3-129


                                                                                                                                                                 2006 Softail: Engine


























                                        Wear
                          Clean all parts in a non-volatile cleaning solution or sol-
                                                                                      3.19 BOTTOM END OVER-  TOP END OVERHAUL:
                     Old gasket material left on mating surfaces will cause
                   Scrape old gasket material from the crankcase flanges.
              CLEANING AND INSPECTION




                                  1WARNING 1WARNING Compressed air can pierce the skin and flying debris from compressed air could cause serious eye injury.  safety glasses when working with compressed air. Never use your hand to check for air leaks or to determine air Blow parts dry with low pressure compressed air. Verify that all oil holes and passageways are clean and Check ring dowels for looseness, wear or damage. Use a file to carefully remove any nicks or burrs from Clean out tapped holes and clean up damaged threads. Check the top of the crankcase for flatness with a straightedge and feeler gauge. Replace if warped. Spray all machined surfaces with clean eng












                        leaks.  vent.         flow rates. (00061a)  open.  Replace as necessary.  machined surfaces.  Perform all steps under   HAUL: ASSEMBLY. Perform all steps under   ASSEMBLY.
          HOME     1.     2.                      3.  4.  5.  6.   7.  8.  9.         1.   2.
   911   912   913   914   915   916   917   918   919   920   921