Page 912 - 2006 HARLEY FLSTCI SERVICE MANUAL
P. 912

3-125



                                          Figure 3-173. Sprocket Shaft Bearing  Cone Installer (Part No. HD-97225-55B)                                           2006 Softail: Engine


















               h97255-55B





                                                                             on

                                                                             (HD-95637-46A)







                      forcing screw and/or sprocket shaft.  contact with hardened plug.  using a circular motion.   to shaft and leading edge of bearing inner race.  WEDGE  together.  result in damage to flywheel.   See Figure 3-172.   using a circular motion.   to shaft and leading edge of bearing inner race.  free of sprocket shaft.
                CAUTION Failure to use hardened plug may result in damage to Place cupped side of hardened plug against end of sprocket shaft. Thread forcing screw into bridge until the steel ball at the end of the screw makes firm Using the Robinair Heat Gun (HD-25070), uniformly heat the bearing inner race for about 30 seconds  NOTE To facilitate removal without heat, apply a light penetrating oil  1WARNING 1WARNING Do not use heating devices with penetrating oil. Penetrat- ing oil is flammable which could result in death or seri- Turn forcing screw until thrust washer and bearing inner race move approximately 1/8 inch (3.2 mm). Turn hex nuts an equal number of tu













          HOME           h.        i.                        ous injury. (00375a)  j.   k.   l.       m.     n.              o.   p.   2.
   907   908   909   910   911   912   913   914   915   916   917