Page 512 - Womens Pavilion

TotalAlert Infinity™ NFPA Medical Gas Notification System

• From the Configure Sig screen, touch 4.8 Website
the tab that represents the wire landing 4.8.1 Navigating the Website
location for the signal on the originating
panel. Accessing the Web Page
• Touch the tab for the appropriate board 1. Start a web browser such as Microsoft
and terminal block. Internet Explorer.

2. Enter the Device’s IP address in the brows-
er’s address bar:
Example: http://10.10.5.10
3. After you enter the device name or IP
address, the alarm’s home page will be
displayed.

NOTE:
To learn the IP address, touch the MISCEL-
LANEOUS tab on the configuration screen
then touch the WIRED ETHERNET tab.
Figure 183: Configure Sig Screen
• Touch the Save button when you see a
check beside your selection. This should
go automatically to the SIGNAL SETTINGS
screen.
• Touch the NONE/BLANK tab.

Figure 185: Typical Alarm Panel Home Page

Figure 184: Signal Settings Screen

To select source signal input text:
• Scroll through the options using the
right and left arrows at the bottom of the
screen.
• Touch the tab for the appropriate option.
• Touch the Save button when you see a
check beside your selection to close and
return to the SIGNAL SETTINGS screen.
• Touch the X button in the upper right
to close and return to the CONFIGURE
(SOURCE) screen.
4-45 4107 9016 58.02