Page 57 - FreesStyler® Installation and Startup

®
INSTALLATION AND STARTUP

Chapter 4 Frame and Carriage Assembly

Installing the Boom Mount

4) Drill the upper hole of the Boom Mounts base plate through the wall according to the following dimensions.
The following items are recommended for mounting through a block wall:

3” x 3” Mounting Plates (6)
Threaded Rods (3)
3 Sets Required

Flat Washers (6)

Lock-Washers (3)
Regular Nut s (6)

5) Square the Boom Mount base plate and drill the other two holes and complete the process.
6) Take the Boom Mount Clamp and secure it into place 2” from the outer edge of the Boom
Mount as shown below.

2” from edge

Note: From the outer edge of the rail to the edge of the Boom Mount Clamp should measure 2”.
If this is not the distance, adjust it to make it so.

1MANUL220 Belanger, Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (248) 349-7010 * Fax (248) 380-9681 4-15