Page 53 - FreesStyler® Installation and Startup

®
INSTALLATION AND STARTUP

Chapter 4 Frame and Carriage Assembly

Carriage Placement

11) With the drive shaft key removed, you should be able to push the carriage down the rails by hand
from stop-to-stop. Check for binding and adjust the rail width as necessary to maintain clearance
from the inner and outer lips of the carriage Rollers.
Note: Be sure to dis-engage Carriage Drive system before pushing the Carriage.

Note: The clearance between each roller and the side of the rail at the center of each detail plate
should be checked and verified to be around 1/16’’.

12) Install End Limit Proximity Targets on the passenger side rails as shown below. The entrance
installs on the Rail Travel Stop Clamps and the exit installs onto the rails.

Exit

Entrance

Direction of Travel

1MANUL220 Belanger, Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (248) 349-7010 * Fax (248) 380-9681 4-11