Page 22 - Chameleon® Arch Series

CHAMELEON® ARCH SERIES

Installation

Neon Strip Kit Installation and Electrical Connections
1) Locate the neon strip kit accessory box and remove the 8 lengths of aluminum extrusions along
with the 16 self tapping screws. Secure each extrusion on to the head beam and each leg as shown
in the image below.

23-3/8”
37-1/2”
37-1/2”

23-3/8”

37-1/2”
37-1/2”
2”
Do not
secure yet
2”
Do not
secure yet

Note: Use the details in the following image(s) along with the notes to insure that a proper
mounting location has been achieved for the bottom section of aluminum extrusion to
the legs. This will vary from site to site.
2) Once all of the aluminum extrusions are in place except for the bottom two, remove the electrical
box assembly and the 4 socket head fasteners from the accessory box and secure the electrical
box to the head beam as shown in the image below. Keep the lid off at this time.

Before After

3) Locate the Arch Pendant cover kit. Slide the front section of the pendant cover in place and secure
it with the supplied fasteners and caps. Use the image below for more detail.

Note: Above image shows the Oval Pendant

18 Belanger, Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (810) 349-7010 * Fax (810) 380-9681 1MANUL526