Page 34 - Chameleon® Arch Series

CHAMELEON® ARCH SERIES

Installation

Additional Options: Foam Pods

Single Foam Pods and Triple Foam Pods

Note: If you have extension brackets for your foaming pods, mount one to each angle using the
supplied 3/8-16 fasteners and washers.

Before After

3) Mount the foaming pod assemblies to either the angle or the extension bracket using the
fasteners and washers as shown in the images below. Adjustment to the angle of the
foam pod spray pattern can be done once all of the lines and hookups have been
completed.

The image above shows the Singe Foaming Pod. The Triple Foaming Pod mounts the same way. Keep in mind that the pods can be
mounted in an inverted position but you will have to change them from one leg to the other as explained in the “Things You Should
Know” section.
Note: The foaming pods can be mounted two different ways. Refer to the illustrations below for
more details on how this is done.
4) Remove the center feed assembly from the accessory box. If you are hooking up single
foam pods, you will have been shipped two, tee/elbow assemblies.

If you are hooking up triple foam pods, you will have been shipped an aluminum manifold
assembly.

Tee/Elbow
Assemblies
Aluminum Manifold
Assembly

30 Belanger, Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (810) 349-7010 * Fax (810) 380-9681 1MANUL526