Page 45 - Chameleon® Arch Series

CHAMELEON® ARCH SERIES

Installation

Additional Options: Single K-Nozzle Manifolds

Single K-Nozzle Manifold Installation
1) Locate the box that the K-Nozzle components shipped in and confirm that all of the
pieces are there and also that there is no damage to any of the components.
2) Remove the two foam tube assemblies, the driver side spray manifold assembly and the
passenger side spray manifold assembly. The side spray manifolds are labeled with a
tag.

3) Apply Teflon™ tape and liquid Teflon™ to the threads on the ends of both side spray
manifolds.

Apply Teflon™ tape and
liquid Teflon™ here

Apply Teflon™ tape and
liquid Teflon™ here

4) Mount a foam tube assembly to the end of each manifold. When you tighten the foam
tube assemblies to the manifolds, make sure that the elbow fittings (shown in dotted
ovals below) face away from the center of the bay.

Before After

1MANUL526 Belanger, Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (810) 349-7010 * Fax (810) 380-9681 41