Page 46 - Chameleon® Arch Series

CHAMELEON® ARCH SERIES

Installation

Additional Options: Single K-Nozzle Manifolds

Single K-Nozzle Manifold Installation
5) Locate the accessory box. Inside are six nozzle bodies. Six nozzle body caps with
gaskets, and two different sets of deflection nozzles, each with six. Install three nozzle
bodies onto each spray manifold as shown in the images below.

.

.
6) Determine which set of nozzles you would like to use on your K-Nozzle Arch at this point.
Below are the descriptions for both:
• Light Blue nozzle – 0.5 GPM @ 10 PSI/125° @ 20 PSI
• Black nozzle – 1.0 GPM @ 10 PSI/145° @ 20 PSI
7) Remove the gaskets from each of the nozzle body caps. Place a nozzle into each cap
and then push the gasket back into place.
8) Place the nozzle caps with nozzles onto each of the nozzle bodies and snap them in to
place as shown in the images.

42 Belanger, Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (810) 349-7010 * Fax (810) 380-9681 1MANUL526