Page 33 - Hydro-Hybrid™
P. 33
HYDRO HYBRID™
Installation
Cloth
In order to install the cloth, some disassembly is necessary. Pay attention to how the machine is
taken apart.
1) Loosen the upper locking collar on the drive rack with a 3/16” hex wrench and slide it over against
the flat washer.
2) Loosen lower locking collar of the drive rack using a 5/16” hex wrench.
3) Slide lower locking collar out away from rack and butt it against the plastic end cap.
Side View 1-1/8” bolt,
(remove for cloth
Upper locking collar installation, typical)
Lower
Upper drive arm Flat washer locking
collar
Plastic end cap Shaft
(typical)
bearing
1MANUL253 Belanger, Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (248) 349-7010 * Fax (248) 380-9681 31
